Rutus Versa DD28 Metal Detector

Metal detector featuring a waterproof, multi-frequency black DD coil (28 cm) and powered by Multi Frequency technology, which enhances detection capabilities in wet, highly conductive soils such as beaches, as well as areas rich in magnetite. A significant benefit is provided by the compact structure, achieved through a lower shaft with a round cross-section.

Supported operating frequencies: Multi Frequency mode or single frequency adjustable between 4 and 40 kHz, with increments of 0.2 kHz up to 14.2 kHz, and increments of 0.6 kHz above 14.8 kHz.

• beach – mode designed exclusively for dynamic searching, operating solely in Multi Frequency.
• beach dual – setting intended for detecting in mineralized soils and environments containing non-metallic conductive debris (such as coke and shale), utilizing both static and dynamic functionalities simultaneously, available only in Multi Frequency.
• field – configuration fine-tuned for maximum depth detection of targets in any type of soil.
• field dual – simultaneous mode specialized for the deepest recovery of targets, independent of ground composition.
• park – setting tailored for areas littered with debris, focusing on minimal target masking and precise identification of iron waste.
• park dual – simultaneous operation mode calibrated for searching in trash-heavy locations, emphasizing low masking and advanced steel waste recognition.
• static with discrimination and tone identification – program engineered for the detection of the largest and deepest objects.
• my 1-4 – four customizable user programs available for personal preference.

Multi-Frequency mode grants the highest level of versatility, allowing the detector to automatically utilize the full spectrum of frequencies, significantly increasing the range of detectable targets.

• Rutus Versa DD28 metal detector
• multi-frequency 28 cm black DD coil
• charging cable
• 3.5 mm audio cable
• integrated probe cover
• speaker cover
• silicone plug for charging/audio socket
• plastic cap for the charging/audio socket, suitable for underwater use
• user manual

• Frequencies: Multi Frequency mode or selectable single frequency, adjustable from 4 to 40 kHz—increments of 0.2 kHz up to 14.2 kHz, and steps of 0.6 kHz beyond 14.8 kHz.
• EMI interference preview
• Automatic ground balance
• Sensitivity: 30 adjustable levels
• Digital target ID: 120 segments (iron range: -29 to 0; non-ferrous range: 0 to 90)
• Standard discrimination: 120 segments
• Selective discrimination: 120 segments
• Recovery speed: 8 selectable levels
• Main signal strength
• Main signal tone
• Iron audio volume
• SAT with 20 adjustable levels
• VCO continuously active (variable audio pitch in Dual programs)
• Multi-filter always active in Pole and Pole Dual modes
• Tone options: Modulated (Pitch); 1, 2, 3, or 6 tones; 3 customizable user profiles (up to 120 points); tone frequency adjustable from 60 to 999 Hz
• Volume: 30 selectable levels
• Backlight: 21 adjustable brightness levels
• Pinpoint function with coin depth indicator
• 7 preset programs and 4 custom user programs
• WiFi capability for firmware updates and software changes
• Integrated battery—runtime between 10 and 25 hours depending on frequency selection and whether using built-in speaker or headphones; average operation approximately 15 hours
• Recharge time: approximately 7 hours
• Compatible with SR-1 wireless headphones and OS-2 receiver

Operating frequency: Multi-frequency or single frequency, adjustable between 4–40 kHz
Power source: integrated battery
Preset programs: 7 modes plus Pinpoint
Waterproof capability: up to 2.5 meters
Sensitivity adjustment: 30 selectable levels
Classic target discrimination: 120 segments
Selective discrimination: 120 segments
Search coil: DD, 28 cm
Compact (folded) length: 60/69 cm
Extended (unfolded) length: 134 cm
Overall weight: 1330 g
Produced by: Rutus, Poland