A stylish and durable knife. Good materials and heat treatment guarantee trouble-free use in all conditions. Good and inexpensive. I recommend trying it.
Ryś Za-Pas Knife - Stonewashed
Knife with a Full-Tang construction and a fixed, 11 cm Drop-Point blade made of hardened Swedish Sleipner steel, finished with the Stonewash method. The full tang running through the entire length of the handle ensures resistance to heavy loads during intensive work.
The Ryś model is an option for those looking for a durable fixed-blade knife suitable for both everyday field work and more demanding tasks. Its solid construction, refined form and contoured Micarta composite handle scales make it well suited for outdoor trips, camping and bushcraft.
The set includes an ABS sheath made of impact-resistant ABS plastic, allowing belt carry and multi-position attachment to equipment.
high-quality Sleipner tool steel
The Ryś model is made from a single piece of Sleipner tool steel developed by the Swedish Uddeholm steelworks. This steel combines above-average abrasion resistance with high resistance to cracking and chipping, which is a difficult-to-achieve yet highly desirable combination for a knife intended for heavy-duty work.
Additionally, the steel is much less prone to corrosion than typical low-alloy tool steels. The name Sleipner comes from Norse mythology - it was the name of the magical eight-legged steed ridden by the god of war and warriors, Odin. The material has been hardened to a hardness of 59 +/-1 HRC.
drop-point blade, jimping, stonewash finish
The model features a Drop-Point blade with a length of 114 mm and a thickness of 4 mm. The blade also stands out with its strong tip, which significantly reduces the risk of accidental breakage at this point. On the spine of the blade there is jimping allowing secure thumb support and increased control over the edge.
The blade has been finished using the Stonewash method, which gives the steel a matte surface and effectively conceals signs of use that appear during use. The minimal, single-sided cross guard does not interfere during work and, together with the index finger choil, provides sufficient hand protection even during strong thrusts.
Micarta composite handle scales, lanyard hole
The handle consists of ergonomically contoured brown Micarta scales screwed to the tang. The material is made from layers of jute fabric soaked in resin and pressed under high pressure and elevated temperature. High impact resistance, abrasion resistance, moisture resistance and resistance to temperature changes make Micarta well suited to field use.
The slightly textured surface of the scales improves grip and reduces the risk of the knife accidentally slipping out, also in high-humidity conditions. At the end of the handle there is a so-called lanyard hole allowing a cord or lanyard to be threaded through to protect the knife from being lost.
Durable ABS sheath with multi-position mounting
The set includes a rigid sheath made of lightweight and damage-resistant ABS plastic. Holes and eyelets located on each side of the sheath allow multi-position attachment to equipment.
The nylon belt loop has been attached to the sheath with a steel plate, which ensures high stability and durability of the entire construction. The sheath can be mounted on a belt with a maximum width of 62 mm.
set elements
- Za-Pas Ryś Stonewashed knife
- sheath
main features
- solid fixed-blade knife
- drop-point blade
- Full-Tang construction
- blade made of Sleipner tool steel
- material hardened to 59 +/-1 HRC
- blade finished with the Stonewash method
- plain cutting edge
- jimping on the spine of the blade
- cross guard increasing safety
- Micarta composite handle scales
- textured surface of the scales
- lanyard hole at the end of the handle
- rigid, lightweight ABS sheath
- blade width: 25,7 mm
- sheath dimensions: 151,8 x 57,5 x 20,7 mm
- sheath weight: 73 g
- set weight: 259 g
Militaria.pl is a premium dealer of Za-Pas.
Za-Pas is a family-run knife workshop from Poland, founded in 2016 by Daniel Pabiś and his brothers. From the beginning, the company has focused on creating durable, practical knives manufactured 100% in Poland - from design to finished product. Each item is made in a small batch, with attention to detail. The range includes outdoor, hunting, and tactical knives, as well as accessories such as sheaths, sharpeners, and blades. Za-Pas is also responsible for carrying out special projects - such as the WZ.25 Grom knife, designed by Militaria.pl in cooperation with soldiers and outdoor enthusiasts.
| Type | Fixed blade |
|---|---|
| Style | Survival-outdoor |
| Blade length | 114 mm |
| Blade thickness | 4 mm |
| Blade profile | Drop-Point |
| Blade edge | Plain |
| Blunt resistance | Very good |
| Corrosion resistance | Medium |
| Lock type | Fixed blade |
| Overall length | 238 mm |
| Glass breaker | No |
| Lanyard/cord attachment | Hole |
| Blade material | Sleipner |
| Opening method | Fixed blade |
| Handle | Micarta |
| Clip for carrying | No |
| Holster included | Yes |
| Weight | 186 g |
| EAN | 5907049027973 |
| Manufacturer code | RYŚ |
| Brand | Za-Pas |
| EAN |
Reviews with photos
Number of reviews: 4
-
-
It debuted at CEKE in October. A very practical size, it sits well in the hand. The handle is thicker than on the Grom. The Sleipner steel, as well as the workmanship, are very good. Another interesting project by Za-pas and Militaria.
-
I received the knife today, which was supposedly supposed to arrive on Saturday. A knife from the Polish manufacturer Za pas. The Ryś knife - the sheath holds it perfectly; I’m taking off one star because the knife is blunt. The blade thickness is indeed 4 mm. The knife is handy and gives the impression of being solid.
-
The knife is nicely made and well-fitted. The micarta matches the Lynx perfectly :p. But seriously, it feels great in the hand. To be honest, it would be perfect with a 12 cm blade, but you can’t have everything. Ideal for people who didn’t manage to catch the Littleboy drop.
No reviews