Savotta Varjelus 3x2 AR15-AK Placard Panel with Magazine Pouches - MultiCam

Panel in MultiCam camouflage designed for mounting on the Varjelus tactical vest from Savotta. It is equipped with 3 pouches for AR-15 and AK carbines, each of which holds up to two 30-round magazines. In total, it can carry up to six magazines.

Rectangular compartments with flaps effectively secure the contents from falling out, while the adjustable elastic cords allow the retention force to be adjusted to the carried equipment. The model features a damage-resistant construction made mostly of durable 1000D Cordura.

The panel is made of 1000D Cordura, a polyamide fabric with high abrasion resistance, resistance to tearing, and intensive use. The material remains stable during repeated removal and insertion of magazines, and its stiffness helps maintain the proper shape of each compartment.

The reinforcing and mounting elements are made of polyamide webbing. It was used for the buckles, loops, grab handles, and attachment points of the carrying system. The webbing stabilizes the construction and allows installation of compatible G-hook, Tubes, and ROC buckles

The combination of 1000D Cordura and polyester webbing provides mechanical resistance, stable attachment, and proper stiffness during use in demanding field conditions.

The model features properties that reduce the signature in the NIR range, that is near infrared. The materials, dyes, and finishing process used were selected to reduce the difference in infrared radiation reflection between the equipment surface and the surroundings.

The reduced contrast can make quick identification of the equipment more difficult during observation with night vision. This applies both to the main fabric and to the visible webbing elements, whose NIR reflection properties affect the module's overall signature.

The panel is equipped with 3 double pouches. Each of them holds up to two 30-round magazines for AR-15 or AK and is fitted with a separate flap closed with velcro and webbing. The flaps protect the magazines from slipping out. The closure height can be adjusted to the type of magazine.

On the inner side of the flaps, special elements are used whose purpose is to reduce the noise generated when opening velcro fastenings. This solution allows control over the way the flap is opened and reduces the characteristic sound of velcro being pulled apart. This is important during use in situations requiring discretion.

The circumference of the compartments and the retention force can be adjusted with an elastic cord. This allows the pouch to be fitted to magazines of different shapes and fill levels. After folding the flap into the compartment, the cord can be tightened and the pouch used in an open configuration. This method provides faster access to a single magazine.

At the bottom of each compartment there are drainage holes allowing water to drain freely. Behind the flaps there are webbing loops through which an elastic cord can be routed and used to stabilize a radio or another item. In the lower corners there are pull tabs that make it easier to open the pouch, detach the velcro, and obtain a secure point of support for the fingers.

The rear part of the panel is equipped with low-profile G-hook hooks and a large velcro panel, allowing installation on compatible platforms. This combination ensures stable retention of the module while also allowing it to be quickly detached and the equipment configuration changed.

The G-hook hooks are attached using strong webbing, so they can be replaced if needed with Side Release quick-release buckles. The side loops allow the use of split QR buckles and systems such as Tubes and ROC.

• panel for the Varjelus tactical vest
• 3 double magazine compartments
• capacity of up to 6 magazines
• compatible with AR-15/AK magazines
• protective flaps with velcro
• internal fastening noise reduction
• adjustable retention with elastic cord
• can be configured in an open setup
• reinforced lower parts of the compartments
• drainage holes in the bottom
• loops for radios
• steel mounting buckles
• pull tabs in the corners
• damage-resistant 1000D Cordura
• polyester webbing reinforcing the construction
• properties reducing the NIR signature
• dimensions 25 x 25 x 6 cm
• weight: 290 g

MultiCam is a state-of-the-art camouflage pattern developed in 2002 by US company Crye Precision in cooperation with the United States Army Soldier Systems Center (Natick Labs) as part of the Objective Force Warrior program. Its goal was to create a versatile camouflage pattern that is effective in varied terrain and changing environmental conditions. The MultiCam pattern consists of seven colors, creating gradient transitions between shades of green, brown and beige. As a result, it dynamically adapts to the background, adopting shades of green in forested areas or browns and beiges in desert regions - in Central and Eastern European environments, it works particularly well in autumn and among dry vegetation. MultiCam has gained worldwide recognition and is used by numerous armed forces and special units. In 2010, the camouflage was officially adopted by the US Army as the camouflage pattern for soldiers stationed in Afghanistan, replacing the earlier Universal Camouflage Pattern (UCP). The pattern is also available to civilian users, making it a popular choice among military or airsoft enthusiasts.