Brunnirok Oldenburg Cut-Resistant Jacket - Olive

Cut-resistant jacket in olive green designed as specialist protective clothing intended for users exposed to contact with sharp tools or edges - both in professional environments and during selected outdoor activities. It will prove useful for technical and service work and anywhere there is a risk of accidental cutting of the garment material and contact of the blade with the body.

The construction is based on the use of advanced cut-resistant material, which combines high mechanical resistance with relatively low weight. The model was developed to provide the highest possible level of protection for critical areas of the upper body, including the neck area. The jacket has been classified as category II personal protective equipment (PPE).

The inner layer of the jacket is made of an advanced fibre blend:

• Aramid (50%) - responsible for very high mechanical resistance and cut resistance, it is the primary protective component
• polyester (33%) - stabilizes the structure of the material, increases its service life and improves resistance to stretching and deformation
• fibreglass (17%) - serves a reinforcing function - its high hardness and resistance to blade action hinder material penetration, creating an additional protective barrier

The combination used made it possible to obtain a material with high cut resistance while maintaining low thickness and good flexibility. The outer layer of the jacket is made of a blend of polyester (96%) and elastane (4%). Polyester is responsible for the increased durability of the fabric, while elastane improves its stretchability, allowing a better fit to the body and freedom of movement.

The outer material has windproof and moisture-resistant properties, which limits the penetration of light precipitation and protects against cooling caused by wind. The outer layer provides an additional protective barrier, complementing the cut-resistant properties of the entire construction.

Every area of the jacket has been lined with cut-resistant material, which ensures continuity of the protective layer across the entire surface. The solution used eliminates local weaknesses in the construction, so protection is not limited only to selected panels, but covers all zones exposed to contact with sharp edges or tools.

Particular attention was paid to protecting sensitive areas. The high stand-up collar is an integral element of the protection system, shielding the neck and throat area. Its construction ensures close contact with the body without excessive pressure, so it does not restrict freedom of movement or breathing comfort.

The jacket provides a high level of protection against cuts, meeting the requirements of European standards for protective clothing. The materials used and the construction guarantee effective protection against sharp tools and mechanical hazards:

• cut protection level 5 in accordance with EN 388:2016 - the highest level of resistance to mechanical cuts on a scale of 0-5
• cut protection level D in accordance with EN ISO 13997:1999 - high resistance to cuts from sharp tools at a specified pressure force (scale from the lowest A to the highest F)
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 - meets the requirements for protective clothing and is marked with the CE mark

The Oldenburg model has been classified as category II personal protective equipment (PPE II), which means that it is intended to protect against hazards with a medium level of risk. Products in this category are subject to mandatory conformity assessment and EU type examination carried out by a notified body.

The model is equipped with 3 pockets:

• 1 chest pocket
• 2 side pockets

The use of zippers increases the safety of carried items, and the well-thought-out pocket layout allows convenient organization of equipment.

The jacket is fastened along its full length with a durable zipper, which allows it to be put on and taken off quickly and conveniently. The model stands out with a loose fit, which does not restrict range of motion and allows comfortable use, also during dynamic work.

The manufacturer recommends washing at a maximum temperature of 30 degrees Celsius, without using bleach, and separately in a protective bag. Do not tumble dry or expose to direct sunlight. Ironing is allowed at temperatures up to 110 degrees Celsius. Dry clean only with tetrachloroethylene solvents.

• cut-resistant jacket
• full-surface protective layer without uncovered zones
• high stand-up collar protecting the neck and throat
• cut-resistant material: Aramid (50%), polyester (33%), fibreglass (17%)
• outer layer of wind and moisture resistant material
• high mechanical resistance while maintaining low weight and flexibility
• protection level 5 according to EN 388:2016
• protection level D according to EN ISO 13997:1999
• compliance with EN ISO 13688 and Regulation (EU) 2016/425 (CE marking)
• loose fit ensuring full mobility and comfort
• full-length zipper
• 3 practical pockets