Innovative laser insert designed specifically for ASG replicas, produced by the Polish brand Smart Target. Facilitates laser-based shooting drills when used alongside the Smart Target PRO V2 laser target, eliminating the need for traditional ammunition. Engineered to fit entirely within the barrel, the insert harnesses compressed gas generated during firing to trigger the laser, making it suitable for both electric and gas-powered replicas.
No modifications to your replica are needed for installation; simply insert the device into the barrel tool-free in just a few seconds. Removal is just as straightforward and involves screwing in the provided tool with a standard M4 thread to the front of the emitter.
Powered by two replaceable CR311 batteries, the laser emitter supports up to 10,000 shots and maintains laser output below 5mW. For safety, a pulse duration limiter is incorporated, restricting the laser to a maximum emission of 15 ms per shot, preventing the laser from remaining active once firing is complete.
For gas replicas that lock the bolt to the rear after the final BB is discharged, a special magazine insert ensures slight spring tension, simulating the presence of BBs in the magazine. This feature allows uninterrupted training by removing the necessity to release the bolt after each shot.
The kit includes: - laser insert - battery pack - user manual - tool for extractive removal from the barrel (M4 thread) - component for disabling the bolt return lock in gas replica magazines
A test firing of 10,000 BBs in semi-auto mode with an electric replica revealed no significant wear to any replica components.
WARNING: Do not operate the insert in the replica’s full-auto mode
Technical data Length: 65 mm Weight: 10 g Manufacturer: Smart Target, Poland
The product cannot be installed in SWISS ARMS COLT 1911 (incompatible diameter) and the amount of information is so sparse that so far it's just money wasted.
D...
Review confirmed by purchase
20%
Review for model:
Unfortunately, the product did not meet my expectations. After installing it in the CZ P-10C CO2 pistol, it turned out that due to the long operation time of the laser and the blowback mechanism, a line is generated instead of a dot. This makes the product practically useless for pistols. It's a pity that this information is not included anywhere in the description, even though the problem is well known to the manufacturer. Product returned.
K...
Review confirmed by purchase
20%
Review for model:
For the first time, a complete failure... it's a pity because I had high hopes for the possibility of "dry" practice :(
At first, not forcefully, according to the instructions, inserting the cartridge caused it to be pushed into the barrel and hop-up (which I initially thought was a good sign for the tightness of the seals), but later attempts at use ended exactly as in the previous comment - the laser moves out and finally falls out of the barrel under pressure when shooting, in my case at 360 FPS.
J...
Review confirmed by purchase
80%
Review for model:
The laser insert works properly, but the downside in my case is that the seals do not hold the insert correctly in the barrel and the laser falls out of the barrel under the pressure of the shot. My replica has 413 FPS. Additional, slightly thicker replacement seals might fix the issue.
